Test Instructions

You will need:

• Your test kit
• The swab provided
• The extraction tube and dropper tip provided
• A timer or your phone

Before starting:

• Check the expiry date.
• Do not use the test if the package is damaged or already open.
• Keep the kit between 4–30°C.
• Keep it away from direct light.
• Do not mix parts from different test kits.
• Wash and dry your hands.
• Allow the test and everything you are using to reach room temperature before testing.

• Use the supplied nasal swab.
• Choose the nostril with the most mucus.
• Carefully insert the swab into your nostril.
• Gently rotate the swab against the inside of your nose several times.
• Remove the swab.
• Use the sample straight away.

• Stand the extraction tube upright in the holder provided.
• Peel the seal off the top of the tube.
• Put the swab into the tube so the tip sits in the buffer solution.
• Move the swab up and down for at least 15 seconds.
• Make sure the liquid does not spill.
• Squeeze the tube around the swab while removing it.
• Rotate the swab as you remove it to get as much sample as possible into the liquid.
• Throw the swab away.
• Attach the dropper tip securely to the tube.

• Open the test cassette.
• Place it flat on a clean surface.
• Turn the tube upside down.
• Add 3 drops into the sample area marked S.
• Start your timer.

• Read your result at 15 minutes.
• Do not read the result after 20 minutes.

Use the words and line positions together. Never rely on colour alone.

• A negative result does not completely rule out an infection.
• If you have symptoms or are still concerned, we recommend speaking to a healthcare professional about further testing.