You're viewing:
Gonorrhoea Test
Before you start
You will need:
- Your Gonorrhoea test kit
- The swab provided
- A timer or your phone
Before starting:
- Check the expiry date.
- Do not use the test if the package is damaged or already open.
- Keep the kit between 4–30°C.
- Do not freeze the kit.
- Keep it away from direct light.
- Wash and dry your hands.
Step 1 — Collect your sample
Female
- Use the supplied swab.
- Carefully insert the swab into the vagina, approximately 1–1.5 cm.
- Rotate the swab several times.
- Keep it in place for 5–10 seconds.
- Remove the swab.
Male
- Do not urinate for at least 2 hours before taking the sample.
- Use the supplied swab.
- Carefully insert the swab into the urethra (the tube at the tip of the penis that carries urine), approximately 2–4 cm.
- Rotate the swab several times.
- Keep it in place for 5–10 seconds.
- Remove the swab.
- Collect the sample carefully. If not enough of the sample is collected, the test may incorrectly show a negative result.
- If you cannot test the sample straight away, keep it refrigerated at 2–8°C and use it within 24–72 hours.
Step 2 — Prepare your sample
- Make sure the test and sample are at room temperature.
- Put the swab into the extraction tube.
- Add 8 drops of Solution A (the tube with the blue tip).
- Squeeze the tube around the swab and rotate the swab 15 times.
- Leave it for 2 minutes.
- Add 8 drops of Solution B (the tube with the purple tip).
- Squeeze the tube around the swab and rotate the swab 15 times.
- Leave it for 1 minute.
- Squeeze the swab against the side of the tube.
- Remove and throw the swab away.
- Attach the dropper tip.
Step 3 — Take the test
- Open the test cassette.
- Place it flat on a clean surface.
- Turn the tube upside down.
- Add 3 drops into the sample area.
- Start your timer.
Step 4 — Read your result
- Read your result at 15 minutes.
- Do not read the result after 20 minutes.
Result timing
Read your result at 15 minutes.
Do not read the result after 20 minutes.
How to read your result
Use the words and line positions together. Never rely on colour alone.
Positive
C
T
C + T = Positive
- What it means
- Gonorrhoea has been detected.
- What to do next
- We recommend speaking to a doctor, GP or healthcare professional.
Negative
C
T
C only = Negative
- What it means
- Gonorrhoea was not detected by the test.
- What to do next
- If you are still concerned, the test instructions recommend repeating the test after 1–2 days.
Invalid
C
T
No C line = Invalid
- What it means
- The test has not worked correctly.
- What to do next
- Repeat the test using a new kit.
Important information
- If not enough sample is collected, the test may incorrectly show a negative result.
- If you cannot test the sample straight away, keep it refrigerated at 2–8°C and use it within 24–72 hours.
