You're viewing:
Flu A/B & COVID-19 Combo Test
This test checks for: COVID-19, Flu A, Flu B
Before you start
You will need:
- Your test kit
- The swab provided
- The extraction tube and dropper tip provided
- A timer or your phone
Before starting:
- Check the expiry date.
- Do not use the test if the package is damaged or already open.
- Keep the kit between 4–30°C.
- Keep it away from direct light.
- Do not mix parts from different test kits.
- Wash and dry your hands.
- Allow the test and everything you are using to reach room temperature before testing.
Step 1 — Collect your sample
- Use the supplied nasal swab.
- Choose the nostril with the most mucus.
- Carefully insert the swab into your nostril.
- Gently rotate the swab against the inside of your nose several times.
- Remove the swab.
- Use the sample straight away.
Step 2 — Prepare your sample
- Stand the extraction tube upright in the holder provided.
- Peel the seal off the top of the tube.
- Put the swab into the tube so the tip sits in the buffer solution.
- Move the swab up and down for at least 15 seconds.
- Make sure the liquid does not spill.
- Squeeze the tube around the swab while removing it.
- Rotate the swab as you remove it to get as much sample as possible into the liquid.
- Throw the swab away.
- Attach the dropper tip securely to the tube.
Step 3 — Take the test
- Open the test cassette.
- Place it flat on a clean surface.
- Turn the tube upside down.
- Add 3 drops into the sample area marked S.
- Start your timer.
Step 4 — Read your result
- Read your result at 15 minutes.
- Do not read the result after 20 minutes.
Result timing
How to read your result
Use the words and line positions together. Never rely on colour alone.
Negative
C only = Negative
- What it means
- No Flu A, Flu B or COVID-19 was detected by the test.
- What to do next
- If you have symptoms or are still concerned, we recommend speaking to a healthcare professional about further testing.
Flu A detected
C + A = Flu A detected
- What it means
- Flu A has been detected.
- What to do next
- Consider your symptoms and speak to a healthcare professional where appropriate.
Flu B detected
C + B = Flu B detected
- What it means
- Flu B has been detected.
- What to do next
- Consider your symptoms and speak to a healthcare professional where appropriate.
COVID-19 detected
C + T = COVID-19 detected
- What it means
- COVID-19 has been detected.
- What to do next
- Follow current health guidance and seek professional advice where appropriate.
Invalid
No C line = Invalid
- What it means
- The test has not worked correctly.
- What to do next
- Repeat the test using a new kit.
Important information
- A negative result does not completely rule out an infection.
- If you have symptoms or are still concerned, we recommend speaking to a healthcare professional about further testing.
