You're viewing:
Gonorrhoea Test
Before you start
You will need:
- Your Gonorrhoea test kit
- The swab provided
- A timer or your phone
Before starting:
- Check the expiry date.
- Do not use the test if the package is damaged or already open.
- Keep the kit between 4–30°C.
- Do not freeze the kit.
- Keep it away from direct light.
- Wash and dry your hands.
Step 1 — Collect your sample
Female
- Use the supplied swab.
- Carefully insert the swab into the vagina, approximately 1–1.5 cm.
- Rotate the swab several times.
- Keep it in place for 5–10 seconds.
- Remove the swab.
Male
- Do not urinate for at least 2 hours before taking the sample.
- Use the supplied swab.
- Carefully insert the swab into the urethra (the tube at the tip of the penis that carries urine), approximately 2–4 cm.
- Rotate the swab several times.
- Keep it in place for 5–10 seconds.
- Remove the swab.
- Collect the sample carefully. If not enough of the sample is collected, the test may incorrectly show a negative result.
- If you cannot test the sample straight away, keep it refrigerated at 2–8°C and use it within 24–72 hours.
Step 2 — Prepare your sample
- Make sure the test and sample are at room temperature.
- Put the swab into the extraction tube.
- Add 8 drops of Solution A (the tube with the blue tip).
- Squeeze the tube around the swab and rotate the swab 15 times.
- Leave it for 2 minutes.
- Add 8 drops of Solution B (the tube with the purple tip).
- Squeeze the tube around the swab and rotate the swab 15 times.
- Leave it for 1 minute.
- Squeeze the swab against the side of the tube.
- Remove and throw the swab away.
- Attach the dropper tip.
Step 3 — Take the test
- Open the test cassette.
- Place it flat on a clean surface.
- Turn the tube upside down.
- Add 3 drops into the sample area.
- Start your timer.
Step 4 — Read your result
- Read your result at 15 minutes.
- Do not read the result after 20 minutes.
Result timing
How to read your result
Use the words and line positions together. Never rely on colour alone.
Positive
C + T = Positive
- What it means
- Gonorrhoea has been detected.
- What to do next
- We recommend speaking to a doctor, GP or healthcare professional.
Negative
C only = Negative
- What it means
- Gonorrhoea was not detected by the test.
- What to do next
- If you are still concerned, the test instructions recommend repeating the test after 1–2 days.
Invalid
No C line = Invalid
- What it means
- The test has not worked correctly.
- What to do next
- Repeat the test using a new kit.
Important information
- If not enough sample is collected, the test may incorrectly show a negative result.
- If you cannot test the sample straight away, keep it refrigerated at 2–8°C and use it within 24–72 hours.
